What is art? Critics and philosophers are free to debate the concern constantly, however we believe it’s quite easy: If there’s a frame around it, then it’s art! Less easy– however not so intricate that you shouldn’t give it a try– is constructing your own image frame. Beginning woodworkers like this task, and for many others it can be a terrific money-saver. Within just a weekend, supplied you have access to a few basic tools, you can make a picture frame frame sealing tape to keep for the rest of your life.
Table sawMiter sawWood routerMeasuring tapeWood glueHammerBrad nailsSandpaperPaintWood stainLinseed oil
Available at AmazonWe participate in the Amazon Services LLC Associates Program, an affiliate marketing program created to offer a method for us to make costs by linking to Amazon.com and associated sites.
The following steps use in a basic method no matter what type of wood you wish to use (or take place to have on hand), or what size you would like the picture frame to be. But for the sake of simpleness in this tutorial, we’ll assume that you mean to develop an 11 ″ x 14 ″ image frame from a 1 ″ x 4 ″ maple board that measures 4 feet long.
Setting the table saw at 1-1/2 ″ (from the blade to the fence) use bear claw hangers, rip the wood board into two 4-foot-long pieces. These should be exactly the exact same width, so pass the larger of the two through the table saw a second time. (Naturally, if you ‘d desired the frame larger or narrower, you would have set the table saw accordingly.).
With a router, cut a 1/2 ″ x 1/2 ″ rabbet– that is, a rectilinear groove– along among the long sides of each of the two pieces. The picture is going to lie against the rabbet, so if you anticipate to frame an item (or to use a mat) of considerable thickness, accommodate it by producing a more generous rabbet.
Use a miter saw to cut one end of both boards at a 45-degree angle, bewaring to make certain that the rabbet runs along what is to become the inside of the frame. Simply put, when you have actually ended up cutting an angle into each board, the rabbeted edges should be opposite the longer (and pointier) side.
Measure the longer side of the picture you are going to frame; include 1/16 ″ to that measurement. Then select among the two boards and move that total measurement to its rabbeted side, marking the range. Here, cut a 45-degree angle, this time in the instructions opposite to the preliminary angled cut. Next, position the second board over the one into which you have actually recently cut a second angle. Mark the second board, then sufficed so that you have a pair of identical pieces. On the two remaining pieces, repeat the procedure of measuring, marking, and cutting, this time using as a guide the shorter side of the picture to be framed. Make sure you’re keeping the rabbeted side to the inside of the frame.
Put together the 4 pieces into a rectangle-shaped shape, keeping in mind constantly to place the rabbet groove to the within. Dab wood glue onto each joint, then secure the pieces together by means of brad nails. 2 nails close to each outside corner should do the trick. Wipe away any excess glue instantly. Let dry over night.
Sand the picture frame for hanging art securely in hotels and museums, then wipe away any sawdust with a moist fabric. Once you have actually allowed enough time for the wood to dry completely, it’s safe to use your choice of finish. (If you’re constructing with appealing lumber, I recommend finishing with linseed oil.) Having ended up the piece, flip it over so the back (rabbeted) side is facing up. Fit a piece of cut-to-size glass into the frame, then lay the picture face down on the glass and location a backing over it. You have several options for protecting everything in place, consisting of glazing points or brads.
Congratulations, you’ve produced a work of art: You may even decide to leave the picture out totally, due to the fact that the frame itself is such a masterpiece!
View More